SSI corpus

119 surface/surface intersection cases from https://github.com/jyviko/ssi-corpus at b04c8a6093a8, from reports/ssi-corpus.json. Each output is scored against the known intersection (4001 samples per curve, accuracy tolerance 1e-05, approximation tolerance 1e-6). Flags are the C++ result's.

Verdict	C++	Rust
DEFERRED	0	116
ERROR	2	0
INCOMPLETE	25	0
PASS	81	3
WRONG TOPOLOGY	11	0

Search Class C++ Rust

Case	Class	Surfaces	C++	Rust	Parity	Flags
`c1_cone_plane_ellipse`	1 transversal	cone × plane	PASS SM_SUCCESS	DEFERRED waits on surface.cone_p3: `SmCone::GlobalSurfaceIntersect`
`c1_cone_plane_hyperbola`	1 transversal	cone × plane	PASS SM_SUCCESS	DEFERRED waits on surface.cone_p3: `SmCone::GlobalSurfaceIntersect`
`c1_cyl_cyl_two_loops`	1 transversal	cylinder × cylinder	PASS SM_SUCCESS	DEFERRED waits on surface.cone_p3: `SmCylinder (SmCone::GlobalSurfaceIntersect)`
`c1_plane_cyl_ellipse`	1 transversal	plane × cylinder	PASS SM_SUCCESS	DEFERRED waits on surface.cone_p3: `SmCylinder (SmCone::GlobalSurfaceIntersect)`
`c1_plane_halfcyl_arc`	1 transversal	plane × cylinder	PASS SM_SUCCESS	DEFERRED waits on surface.cone_p3: `SmCylinder (SmCone::GlobalSurfaceIntersect)`
`c1_plane_sphere_circle`	1 transversal	plane × sphere	PASS SM_SUCCESS	DEFERRED waits on surface.sphere: `SmSphere::GlobalSurfaceIntersect`
`c1_sphere_cyl_two_loops`	1 transversal	sphere × cylinder	PASS SM_SUCCESS	DEFERRED waits on surface.sphere: `SmSphere::GlobalSurfaceIntersect`
`c1_torus_plane_nested`	1 transversal	torus × plane	PASS SM_SUCCESS	DEFERRED waits on surface.surface_p2: `SurfaceKind::Torus (SmTorus dispatch through SmSurface)`
`c1n_cylN_plane_ellipse`	1 transversal	nurbs × plane	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`c1n_parab_parab_circle`	1 transversal	nurbs × nurbs	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`c1n_parab_plane_circle`	1 transversal	nurbs × plane	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`c1n_saddle_plane_hyperbola`	1 transversal	nurbs × plane	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`c1n_sphereN_cylN_two_loops`	1 transversal	nurbs × nurbs	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`c1n_torusN_planeN_nested`	1 transversal	nurbs × nurbs	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`c2_cones_tangent_ruling`	2 tangent curve	cone × cone	PASS SM_SUCCESS	DEFERRED waits on surface.cone_p3: `SmCone::GlobalSurfaceIntersect`
`c2_cyl_cyl_external`	2 tangent curve	cylinder × cylinder	PASS SM_SUCCESS	DEFERRED waits on surface.cone_p3: `SmCylinder (SmCone::GlobalSurfaceIntersect)`
`c2_cyl_on_plane`	2 tangent curve	plane × cylinder	PASS SM_SUCCESS	DEFERRED waits on surface.cone_p3: `SmCylinder (SmCone::GlobalSurfaceIntersect)`
`c2_sphere_in_cyl`	2 tangent curve	sphere × cylinder	PASS SM_SUCCESS	DEFERRED waits on surface.sphere: `SmSphere::GlobalSurfaceIntersect`
`c2_sphere_in_torus`	2 tangent curve	sphere × torus	PASS SM_SUCCESS	DEFERRED waits on surface.sphere: `SmSphere::GlobalSurfaceIntersect`
`c2n_cylN_on_planeN`	2 tangent curve	nurbs × nurbs	WRONG TOPOLOGY SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		output curves 0 and 1 overlap (100% of one lies on the other) topology ['curve(free_ends=0)'], expected ['curve(free_ends=2)']
`c2n_parabcyl_plane`	2 tangent curve	nurbs × plane	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`c2n_quartic_circle`	2 tangent curve	nurbs × plane	INCOMPLETE SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		branch 0 covered 0% (max gap inf) topology [], expected ['curve(free_ends=0)']
`c2n_quartic_contact_parabola`	2 tangent curve	nurbs × nurbs	ERROR SM_ERR_NULL_POINTER	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		ERROR status SM_ERR_NULL_POINTER branch 0 covered 0% (max gap inf) topology [], expected ['curve(free_ends=2)']
`c2n_sphereN_in_cyl`	2 tangent curve	nurbs × cylinder	PASS SM_SUCCESS	DEFERRED waits on surface.cone_p3: `SmCylinder (SmCone::GlobalSurfaceIntersect)`
`c3_sphere_on_plane`	3 isolated point	sphere × plane	PASS SM_SUCCESS	DEFERRED waits on surface.sphere: `SmSphere::GlobalSurfaceIntersect`
`c3_sphere_torus_outer`	3 isolated point	torus × sphere	INCOMPLETE SM_SUCCESS	DEFERRED waits on surface.surface_p2: `SurfaceKind::Torus (SmTorus dispatch through SmSurface)`		isolated point 0 not found (nearest output inf) topology [], expected ['point']
`c3_spheres_external`	3 isolated point	sphere × sphere	PASS SM_SUCCESS	DEFERRED waits on surface.sphere: `SmSphere::GlobalSurfaceIntersect`
`c3_spheres_internal`	3 isolated point	sphere × sphere	PASS SM_SUCCESS	DEFERRED waits on surface.sphere: `SmSphere::GlobalSurfaceIntersect`
`c3n_four_points`	3 isolated point	nurbs × plane	INCOMPLETE SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		isolated point 0 not found (nearest output inf) isolated point 1 not found (nearest output inf) isolated point 2 not found (nearest output inf) isolated point 3 not found (nearest output inf) topology [], expected ['point', 'point', 'point', 'point']
`c3n_parab_apex`	3 isolated point	nurbs × plane	INCOMPLETE SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		isolated point 0 not found (nearest output inf) topology [], expected ['point']
`c3n_parab_parab_apex`	3 isolated point	nurbs × nurbs	INCOMPLETE SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		isolated point 0 not found (nearest output inf) topology [], expected ['point']
`c4_cone_apex_plane`	4 singular	cone × plane	PASS SM_SUCCESS	DEFERRED waits on surface.cone_p3: `SmCone::GlobalSurfaceIntersect`
`c4_steinmetz`	4 singular	cylinder × cylinder	WRONG TOPOLOGY SM_SUCCESS	DEFERRED waits on surface.cone_p3: `SmCylinder (SmCone::GlobalSurfaceIntersect)`		singular point 1 not identified (no curve end/point within 1.0e-03; nearest 1.73e+00)
`c4_viviani_figure8`	4 singular	sphere × cylinder	WRONG TOPOLOGY SM_SUCCESS	DEFERRED waits on surface.sphere: `SmSphere::GlobalSurfaceIntersect`		singular point 0 not identified (no curve end/point within 1.0e-03; nearest 2.00e+00)
`c4n_cusp`	4 singular	nurbs × plane	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`c4n_saddle_tangent_plane`	4 singular	nurbs × plane	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`c4n_viviani_nurbs`	4 singular	nurbs × nurbs	WRONG TOPOLOGY SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		singular point 0 not identified (no curve end/point within 1.0e-03; nearest 2.00e+00)
`c5_corner_to_corner`	5 boundary	plane × plane	PASS SM_SUCCESS	PASS	identical
`c5_curve_on_edge`	5 boundary	plane × plane	PASS SM_SUCCESS	PASS	identical
`c5_cyl_end_circle`	5 boundary	cylinder × plane	PASS SM_SUCCESS	DEFERRED waits on surface.cone_p3: `SmCylinder (SmCone::GlobalSurfaceIntersect)`
`c5_cyl_quilt_seam`	5 boundary	cylinder × cylinder	PASS SM_SUCCESS	DEFERRED waits on surface.cone_p3: `SmCylinder (SmCone::GlobalSurfaceIntersect)`
`c5_hemisphere_equator`	5 boundary	sphere × plane	PASS SM_SUCCESS	DEFERRED waits on surface.sphere: `SmSphere::GlobalSurfaceIntersect`
`c5_shared_border_L`	5 boundary	plane × plane	PASS SM_SUCCESS	PASS	identical
`c5n_curve_on_edge`	5 boundary	nurbs × plane	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`c5n_cylN_quilt_seam`	5 boundary	nurbs × nurbs	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`c6_cyl_overlap`	6 coincident	cylinder × cylinder	PASS SM_SUCCESS	DEFERRED waits on surface.cone_p3: `SmCylinder (SmCone::GlobalSurfaceIntersect)`
`c6_planes_identical`	6 coincident	plane × plane	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`c6_planes_overlap`	6 coincident	plane × plane	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`c6_spheres_overlap`	6 coincident	sphere × sphere	PASS SM_SUCCESS	DEFERRED waits on surface.sphere: `SmSphere::GlobalSurfaceIntersect`
`c6n_cyl_vs_nurbscyl`	6 coincident	cylinder × nurbs	PASS SM_SUCCESS	DEFERRED waits on surface.cone_p3: `SmCylinder (SmCone::GlobalSurfaceIntersect)`
`c6n_plane_vs_nurbsplane`	6 coincident	plane × nurbs	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`c6n_sphere_vs_nurbssphere`	6 coincident	sphere × nurbs	PASS SM_SUCCESS	DEFERRED waits on surface.sphere: `SmSphere::GlobalSurfaceIntersect`
`c7_angle_planes_1e-3`	7 near-degenerate	plane × nurbs	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`c7_angle_planes_1e-4`	7 near-degenerate	plane × nurbs	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`c7_angle_planes_1e-5`	7 near-degenerate	plane × nurbs	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`c7_angle_planes_1e-6`	7 near-degenerate	plane × nurbs	INCOMPLETE SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		branch 0 covered 50% (max gap 1.00e+00) output curve 0 off the true intersection by up to 1.00e+00 (100% of it) output curve 1 off the true intersection by up to 1.00e+00 (50% of it) output curve 2 off the true intersection by up to 1.00e+00 (100% of it) output curve 3 off the true intersection by up to 1.00e+00 (50% of it) topology ['curve(free_ends=0)'], expected ['curve(free_ends=2)']
`c7_angle_planes_1e-7`	7 near-degenerate	plane × nurbs	INCOMPLETE SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		branch 0 covered 50% (max gap 1.00e+00) output curve 0 off the true intersection by up to 1.00e+00 (100% of it) output curve 1 off the true intersection by up to 1.00e+00 (50% of it) output curve 2 off the true intersection by up to 1.00e+00 (100% of it) output curve 3 off the true intersection by up to 1.00e+00 (50% of it) topology ['curve(free_ends=0)'], expected ['curve(free_ends=2)']
`c7_angle_planes_1e-8`	7 near-degenerate	plane × nurbs	INCOMPLETE SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		branch 0 covered 50% (max gap 1.00e+00) output curve 0 off the true intersection by up to 1.00e+00 (50% of it) output curve 1 off the true intersection by up to 1.00e+00 (100% of it) output curve 2 off the true intersection by up to 1.00e+00 (50% of it) output curve 3 off the true intersection by up to 1.00e+00 (100% of it) topology ['curve(free_ends=0)'], expected ['curve(free_ends=2)']
`c7_offset_planes_1e-3`	7 near-degenerate	plane × nurbs	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`c7_offset_planes_1e-5`	7 near-degenerate	plane × nurbs	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`c7_offset_planes_1e-7`	7 near-degenerate	plane × nurbs	WRONG TOPOLOGY SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		output curve 0 off the true intersection by up to inf (100% of it) output curve 1 off the true intersection by up to inf (100% of it) output curve 2 off the true intersection by up to inf (100% of it) output curve 3 off the true intersection by up to inf (100% of it) topology ['curve(free_ends=0)'], expected []
`c7_offset_spheres_1e-3`	7 near-degenerate	sphere × sphere	PASS SM_SUCCESS	DEFERRED waits on surface.sphere: `SmSphere::GlobalSurfaceIntersect`
`c7_offset_spheres_1e-5`	7 near-degenerate	sphere × sphere	PASS SM_SUCCESS	DEFERRED waits on surface.sphere: `SmSphere::GlobalSurfaceIntersect`
`c7_offset_spheres_1e-7`	7 near-degenerate	sphere × sphere	WRONG TOPOLOGY SM_SUCCESS	DEFERRED waits on surface.sphere: `SmSphere::GlobalSurfaceIntersect`		output curve 0 off the true intersection by up to inf (100% of it) output curve 1 off the true intersection by up to inf (100% of it) output curve 2 off the true intersection by up to inf (100% of it) output curve 3 off the true intersection by up to inf (100% of it) topology ['curve(free_ends=0)'], expected []
`c7_sunk_cyl_1e-3`	7 near-degenerate	plane × cylinder	PASS SM_SUCCESS	DEFERRED waits on surface.cone_p3: `SmCylinder (SmCone::GlobalSurfaceIntersect)`
`c7_sunk_cyl_1e-4`	7 near-degenerate	plane × cylinder	PASS SM_SUCCESS	DEFERRED waits on surface.cone_p3: `SmCylinder (SmCone::GlobalSurfaceIntersect)`
`c7_sunk_cyl_1e-5`	7 near-degenerate	plane × cylinder	PASS SM_SUCCESS	DEFERRED waits on surface.cone_p3: `SmCylinder (SmCone::GlobalSurfaceIntersect)`
`c7_sunk_cyl_1e-6`	7 near-degenerate	plane × cylinder	PASS SM_SUCCESS	DEFERRED waits on surface.cone_p3: `SmCylinder (SmCone::GlobalSurfaceIntersect)`
`c7_tiny_loop_parab_1e-4`	7 near-degenerate	nurbs × plane	INCOMPLETE SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		branch 0 covered 0% (max gap inf) topology [], expected ['curve(free_ends=0)']
`c7_tiny_loop_parab_1e-5`	7 near-degenerate	nurbs × plane	INCOMPLETE SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		branch 0 covered 0% (max gap inf) topology [], expected ['curve(free_ends=0)']
`c7_tiny_loop_parab_1e-6`	7 near-degenerate	nurbs × plane	INCOMPLETE SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		branch 0 covered 0% (max gap inf) topology [], expected ['curve(free_ends=0)']
`c7_tiny_loop_parab_1e-7`	7 near-degenerate	nurbs × plane	INCOMPLETE SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		branch 0 covered 0% (max gap inf) topology [], expected ['curve(free_ends=0)']
`c7_tiny_loop_sphere_1e-4`	7 near-degenerate	plane × sphere	INCOMPLETE SM_SUCCESS	DEFERRED waits on surface.sphere: `SmSphere::GlobalSurfaceIntersect`		branch 0 covered 0% (max gap 1.00e-04) output point 0 off the true intersection by 1.00e-04 topology ['point'], expected ['curve(free_ends=0)']
`c7_tiny_loop_sphere_1e-5`	7 near-degenerate	plane × sphere	INCOMPLETE SM_SUCCESS	DEFERRED waits on surface.sphere: `SmSphere::GlobalSurfaceIntersect`		branch 0 covered 0% (max gap 1.00e-05) output point 0 off the true intersection by 1.00e-05 topology ['point'], expected ['curve(free_ends=0)']
`c7_tiny_loop_sphere_1e-6`	7 near-degenerate	plane × sphere	INCOMPLETE SM_SUCCESS	DEFERRED waits on surface.sphere: `SmSphere::GlobalSurfaceIntersect`		branch 0 covered 0% (max gap 1.00e-06) output point 0 off the true intersection by 1.00e-06 topology ['point'], expected ['curve(free_ends=0)']
`c7_tiny_loop_sphere_1e-7`	7 near-degenerate	plane × sphere	INCOMPLETE SM_SUCCESS	DEFERRED waits on surface.sphere: `SmSphere::GlobalSurfaceIntersect`		branch 0 covered 0% (max gap 1.00e-07) output point 0 off the true intersection by 1.00e-07 topology ['point'], expected ['curve(free_ends=0)']
`c8_cone_plane_seam`	8 periodic/seam/pole	cone × plane	PASS SM_SUCCESS	DEFERRED waits on surface.cone_p3: `SmCone::GlobalSurfaceIntersect`
`c8_cyl_plane_seam_line`	8 periodic/seam/pole	cylinder × plane	PASS SM_SUCCESS	DEFERRED waits on surface.cone_p3: `SmCylinder (SmCone::GlobalSurfaceIntersect)`
`c8_sphere_cyl_through_poles`	8 periodic/seam/pole	sphere × cylinder	PASS SM_SUCCESS	DEFERRED waits on surface.sphere: `SmSphere::GlobalSurfaceIntersect`
`c8_sphere_plane_poles`	8 periodic/seam/pole	sphere × plane	PASS SM_SUCCESS	DEFERRED waits on surface.sphere: `SmSphere::GlobalSurfaceIntersect`
`c8_sphere_plane_poles_seam`	8 periodic/seam/pole	sphere × plane	PASS SM_SUCCESS	DEFERRED waits on surface.sphere: `SmSphere::GlobalSurfaceIntersect`
`c8_sphere_polar_cap`	8 periodic/seam/pole	sphere × plane	PASS SM_SUCCESS	DEFERRED waits on surface.sphere: `SmSphere::GlobalSurfaceIntersect`
`c8_torus_axis_plane_seam`	8 periodic/seam/pole	torus × plane	PASS SM_SUCCESS	DEFERRED waits on surface.surface_p2: `SurfaceKind::Torus (SmTorus dispatch through SmSurface)`
`c8_torus_equator_seam`	8 periodic/seam/pole	torus × plane	PASS SM_SUCCESS	DEFERRED waits on surface.surface_p2: `SurfaceKind::Torus (SmTorus dispatch through SmSurface)`
`c8n_cylN_seam_line`	8 periodic/seam/pole	nurbs × plane	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`c8n_sphereN_polar_cap`	8 periodic/seam/pole	nurbs × plane	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`c8n_sphereN_poles`	8 periodic/seam/pole	nurbs × plane	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`c8n_torusN_equator_seam`	8 periodic/seam/pole	nurbs × plane	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`c9n_deg6_circle`	9 high degree/rational	nurbs × plane	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`c9n_elevated_paraboloids`	9 high degree/rational	nurbs × nurbs	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`c9n_many_spans_plane_sphere`	9 high degree/rational	nurbs × sphere	PASS SM_SUCCESS	DEFERRED waits on surface.sphere: `SmSphere::GlobalSurfaceIntersect`
`c9n_rational_deg5_cyl_arc`	9 high degree/rational	nurbs × plane	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`c9n_rational_deg5_sphere_arc`	9 high degree/rational	nurbs × plane	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`c9n_refined_torus_sphere`	9 high degree/rational	nurbs × sphere	PASS SM_SUCCESS	DEFERRED waits on surface.sphere: `SmSphere::GlobalSurfaceIntersect`
`y23_appendix_ex2`	Y23 published parameters	nurbs × nurbs	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`y23_fig1a_two_loops_cross`	Y23 reconstruction	nurbs × nurbs	WRONG TOPOLOGY SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		singular point 0 not identified (no curve end/point within 1.0e-03; nearest 3.75e-01) singular point 1 not identified (no curve end/point within 1.0e-03; nearest 3.68e-01)
`y23_fig1b_two_arcs_and_point`	Y23 reconstruction	nurbs × nurbs	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`y23_fig1c_boundary_triangle`	Y23 reconstruction	nurbs × nurbs	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`y23_fig1d_two_quads`	Y23 reconstruction	nurbs × nurbs	INCOMPLETE SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		branch 6 covered 1% (max gap 6.77e-01) singular point 2 not identified (no curve end/point within 1.0e-02; nearest 1.70e+00) singular point 3 not identified (no curve end/point within 1.0e-02; nearest 1.40e+00)
`y23_fig1e_loops_touching`	Y23 reconstruction	nurbs × nurbs	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`y23_fig1f_high_order_contact`	Y23 reconstruction	nurbs × nurbs	INCOMPLETE SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		branch 0 covered 1% (max gap 1.25e+00) topology ['point', 'point'], expected ['curve(free_ends=2)']
`y23_fig1g_three_points`	Y23 reconstruction	nurbs × nurbs	INCOMPLETE SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		isolated point 0 not found (nearest output 1.98e+00) isolated point 1 not found (nearest output 1.94e+00) topology ['point'], expected ['point', 'point', 'point']
`y23_t2_ex1_tangent_line`	Y23 reconstruction	nurbs × nurbs	INCOMPLETE SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		branch 0 covered 2% (max gap 6.04e-01) topology ['point', 'point'], expected ['curve(free_ends=2)']
`y23_t2_ex2_tangential_curve`	Y23 reconstruction	nurbs × nurbs	INCOMPLETE SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		branch 0 covered 23% (max gap 4.43e-01) topology ['curve(free_ends=2)', 'point'], expected ['curve(free_ends=2)']
`y23_t2_ex3_loop_two_curves`	Y23 reconstruction	nurbs × nurbs	INCOMPLETE SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		branch 0 covered 8% (max gap 1.67e-01) topology ['curve(free_ends=2)', 'curve(free_ends=2)'], expected ['curve(free_ends=4)'] singular point 0 not identified (no curve end/point within 5.0e-03; nearest 5.73e-01) singular point 1 not identified (no curve end/point within 5.0e-03; nearest 5.29e-01) singular point 2 not identified (no curve end/point within 5.0e-03; nearest 5.49e-01) singular point 3 not identified (no curve end/point within 5.0e-03; nearest 5.72e-01)
`y23_t2_ex4_tangential_curve_saddle`	Y23 reconstruction	nurbs × nurbs	WRONG TOPOLOGY SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		output curves 0 and 1 overlap (58% of one lies on the other) 3D output up to 3.40e-05 from a surface (acc_tol 1e-05) surface at output UV up to 3.40e-05 from the other surface
`y23_t2_ex5_two_loops`	Y23 reconstruction	nurbs × nurbs	ERROR SM_ERR_NULL_POINTER	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		ERROR status SM_ERR_NULL_POINTER branch 0 covered 0% (max gap inf) branch 1 covered 0% (max gap inf) topology [], expected ['curve(free_ends=0)'] singular point 0 not identified (no curve end/point within 5.0e-03; nearest inf) singular point 1 not identified (no curve end/point within 5.0e-03; nearest inf)
`y23_t2_ex6_loop_and_point`	Y23 reconstruction	nurbs × nurbs	INCOMPLETE SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		isolated point 0 not found (nearest output 4.13e-01) topology ['curve(free_ends=0)'], expected ['curve(free_ends=0)', 'point']
`y23_t3_ex1_torus_ellipsoid`	Y23 published parameters	torus × nurbs	PASS SM_SUCCESS	DEFERRED waits on surface.surface_p2: `SurfaceKind::Torus (SmTorus dispatch through SmSurface)`
`y23_t3_ex2_torus_ellipsoid`	Y23 published parameters	torus × nurbs	PASS SM_SUCCESS	DEFERRED waits on surface.surface_p2: `SurfaceKind::Torus (SmTorus dispatch through SmSurface)`
`y23_t3_ex3_torus_ellipsoid`	Y23 published parameters	torus × nurbs	PASS SM_SUCCESS	DEFERRED waits on surface.surface_p2: `SurfaceKind::Torus (SmTorus dispatch through SmSurface)`
`y23_t3_ex4_torus_ellipsoid`	Y23 published parameters	torus × nurbs	WRONG TOPOLOGY SM_SUCCESS	DEFERRED waits on surface.surface_p2: `SurfaceKind::Torus (SmTorus dispatch through SmSurface)`		singular point 0 not identified (no curve end/point within 5.0e-03; nearest 2.83e+00)
`y23_t3_ex5_torus_ellipsoid`	Y23 published parameters	torus × nurbs	PASS SM_SUCCESS	DEFERRED waits on surface.surface_p2: `SurfaceKind::Torus (SmTorus dispatch through SmSurface)`
`y23_t6_ex1_tangent_line`	Y23 reconstruction	nurbs × nurbs	WRONG TOPOLOGY SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		output curves 0 and 1 overlap (100% of one lies on the other) topology ['curve(free_ends=0)'], expected ['curve(free_ends=2)'] 3D output up to 3.43e-05 from a surface (acc_tol 1e-05) surface at output UV up to 3.43e-05 from the other surface
`y23_t6_ex2_tangential_arc`	Y23 reconstruction	nurbs × nurbs	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`y23_t6_ex3_two_crossing_curves`	Y23 reconstruction	nurbs × nurbs	WRONG TOPOLOGY SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		singular point 0 not identified (no curve end/point within 1.0e-03; nearest 8.70e-01)
`y23_t6_ex4_tangential_point`	Y23 reconstruction	nurbs × nurbs	INCOMPLETE SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		isolated point 0 not found (nearest output inf) topology [], expected ['point']
`y23_t6_ex5_four_boundary_curves`	Y23 reconstruction	nurbs × nurbs	PASS SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`
`y23_t6_ex6_four_boundary_curves`	Y23 reconstruction	nurbs × nurbs	INCOMPLETE SM_SUCCESS	DEFERRED waits on intersect.surface_intersector_p5: `SmSurfaceIntersector::DoIntersection`		branch 1 covered 88% (max gap 1.72e-01) output curves 3 and 4 overlap (100% of one lies on the other) output curves 3 and 5 overlap (100% of one lies on the other) output curves 3 and 6 overlap (100% of one lies on the other) output curves 3 and 7 overlap (100% of one lies on the other) output curves 3 and 8 overlap (100% of one lies on the other) output curves 3 and 9 overlap (100% of one lies on the other) output curves 3 and 10 overlap (100% of one lies on the other) output curves 3 and 11 overlap (100% of one lies on the other) output curves 4 and 5 overlap (100% of one lies on the other) output curves 4 and 6 overlap (100% of one lies on the other) output curves 4 and 7 overlap (100% of one lies on the other) output curves 4 and 8 overlap (100% of one lies on the other) output curves 4 and 9 overlap (100% of one lies on the other) output curves 4 and 10 overlap (100% of one lies on the other) output curves 4 and 11 overlap (100% of one lies on the other) output curves 5 and 6 overlap (100% of one lies on the other) output curves 5 and 7 overlap (100% of one lies on the other) output curves 5 and 8 overlap (100% of one lies on the other) output curves 5 and 9 overlap (100% of one lies on the other) output curves 5 and 10 overlap (100% of one lies on the other) output curves 5 and 11 overlap (100% of one lies on the other) output curves 6 and 7 overlap (100% of one lies on the other) output curves 6 and 8 overlap (100% of one lies on the other) output curves 6 and 9 overlap (100% of one lies on the other) output curves 6 and 10 overlap (100% of one lies on the other) output curves 6 and 11 overlap (100% of one lies on the other) output curves 7 and 8 overlap (100% of one lies on the other) output curves 7 and 9 overlap (100% of one lies on the other) output curves 7 and 10 overlap (100% of one lies on the other) output curves 7 and 11 overlap (100% of one lies on the other) output curves 8 and 9 overlap (100% of one lies on the other) output curves 8 and 10 overlap (100% of one lies on the other) output curves 8 and 11 overlap (100% of one lies on the other) output curves 9 and 10 overlap (100% of one lies on the other) output curves 9 and 11 overlap (100% of one lies on the other) output curves 10 and 11 overlap (100% of one lies on the other) topology ['curve(free_ends=3)', 'point', 'point'], expected ['curve(free_ends=2)']